The Series 17 electric actuator features a reversing motor with multi-voltage capabilities; 85 VAC-265 VAC (50/60Hz), 24 VDC. An internal heater, auxiliary switches, and two position indicating LED’s are standard equipment. Additional features include a permanently lubricated steel gear train, NEMA Type 4 & 6 enclosure with a thermally bonded powder coat finish, declutchable manual override, visual mechanical position indication, ISO bolt circle, and flying leads. The Series 17 can be mounted to our Type-21 ball valve and Type-57P butterfly valve.
Resources
Ideal Applications Include: Water and wastewater treatment, landfills, aquariums, chemical processing, swimming pools and water features, power plants, and mining applications.
Video
Specifications
Actuator:
Series 17
Torque:
350 in/lbs
Voltage:
85-265 VAC single phase, 24 VDC
AMP Draw:
0.45
Wiring:
1.2M flying leads
Max Ambient Temperature:
150° F
Limit Switches:
2-SPDT end of travel switches
2-SPDT dry contact switches
Heater:
.5W
Cycle Time per 90 degree:
12 seconds
- Size: Compact, lightweight
- Motor: Low current, reversing DC motor
- Multi-voltage: 85-265 VAC single-phase, 24 VDC
- Overload Protection: Electric motor cuts out at 2 Amps
- Gear Train: Permanently lubricated solid gearing
- Corrosion Resistant Enclosure: Thermally bonded powder coat finish
- Position Indication: Mechanical dial indication
- LEDs: Open and close LED position indication (red/closed, blue/open)
- Declutchable Manual Override: Push down override button and use provided lever to manually position in the event of no power
- Auxiliary Limit Switches: Dry contact switches for open and close positions
- Enclosure: Combination NEMA Type 4X and 6 enclosure with captive cover screws
- Electrical Connections: Sealed cable gland with 1.2M flying leads
- Space Heater: Standard equipment
- ISO Mounting: F03, F04, F05 X 14mm star