A failsafe actuator cycles as on/off while charging internal capacitors. When power is lost, the capacitors discharge and power the unit to a predetermined fail position. When power is restored, the capacitors charge up again.
Applications:
Remote locations, locations with no air supply, colder temperatures, smaller valves, low cost applications
Size:
C20 for 3/8″ – 2″ Omni Type-27 Ball Valves
Amp Draw:
0.18 Amp
Cycle Time:
Per 90 degrees: 10 seconds
Torque:
177 in-lbs
Electrical Connection:
NEMA 4X cable gland with two-meter color coded cable
Enclosure:
NEMA 4X
Voltage:
95 VAC to 265 VAC 1Ph 50/60 Hz
24 AC/DC
Max Temp:
150° F
Applications:
Remote locations, locations with no air supply, colder temperatures, smaller valves, low cost applications
Sizes:
S20FS, S50FS, S110FS
Amp Draw:
0.18 Amp for S20, 0.24 Amp for S50, 0.84 for S110
Cycle Time:
Per 90 degrees: 10 seconds
Torque:
177 in-lbs to 973 in-lbs
Electrical Connection:
NEMA 4X cable gland with two-meter color-coded cable
Enclosure:
NEMA 4X
Voltage:
95 VAC to 265 VAC 1Ph 50/60 Hz
24 AC/DC
Max Temp:
150° F