These valves perform as an ON/OFF or modulating function. The ball valve name derived from the flow-controlling ball valve located within the body of the valve. A hole through the center of the ball along one axis connects the inlet and outlet ports of the body. The ball itself is held in place by PTFE seats and rotates 90° within.. These provide permanent lubrication and keep the valve “bubble-tight.” They are backed by elastomeric cushions, which provide pressure against the ball and, at the same time, compensate for wear. Elastomer O-rings are used for stem and carrier seals to prevent leakage to the atmosphere. In the open position, the flow is straight-through, and there is minimal pressure drop when the porting through the ball is the same size as the inside diameter of the pipe.
Applications:
Isolation valves, water treatment, water features, fountains, aquariums, landfills, swimming pools, power plants, mining, transportation, chemical processing
Size:
1/2″ – 4″*
*6″ end connections available for 4″ valve bodies
Bodies Materials:
PVC/CPVC/PP/PVDF
Seals Materials:
EPDM/FKM
Body Type:
True Union
Applications:
Isolation valves, water treatment, water features, fountains, aquariums, landfills, swimming pools, power plants, mining, transportation, chemical processing
Size:
1/2″ – 2″
Bodies Materials:
PVC
Seals Materials:
EPDM/FKM
Body Type:
True Union
Applications:
Ideal Applications: Water applications, Pools, Water Parks, Light Chemical Service Duty
Size:
1/2″ – 4
Max Operating Pressure
150psi
Bodies Materials:
PVC
Seals Materials:
EPDM or FKM
Body Type:
True Union
End Connector:
Combination (Socket and Threaded)
Applications:
Isolation valves, water treatment, water features, fountains, aquariums, landfills, swimming pools, power plants, mining, transportation, chemical processing
Size:
3/8″ – 2″
Bodies Materials:
PVC, CPVC
Seals Materials:
EPDM
Body Type:
Single piece
Applications:
Chemical processing, water and wastewater
Size:
1/4″
Bodies Materials:
PVC
Seals Materials:
EPDM
Body Type:
Single piece
Applications:
Mixing, blending, diverting, isolating and parallel pipelines. Commonly used industries include chemical processing, bleach plants, aquariums, mining, water treatment, swimming pools, water features, fountains, landfills and power plants.
Size:
½” – 4″*
*6” end connections available for 4″ valve bodies
Bodies Materials:
PVC, CPVC, PP, PVDF
Seals Materials:
EPDM/FKM
Body Type:
True Union
Applications:
Isolation valves, water treatment, water features, fountains, aquariums, landfills, swimming pools, power plants, mining, transportation, chemical processing
Size:
3/8″ – 2″
PLEASE NOTE: This product is obsolete and no longer available. Please see Omni®-Type 27 for current product offerings
Bodies Materials:
PVC, CPVC
Seals Materials:
EPDM
Body Type:
Single piece