Series 17 Electric Actuator on Type-21 Ball Valve
The Series 17 electric actuator features a reversing motor with multi-voltage capabilities; 85 VAC – 265 VAC (50/60Hz), 24 VDC. An internal heater, auxiliary switches, and two position indicating LEDs, are the standard equipment. Additional features include a permanently lubricated steel gear train, NEMA Type 4 & 6 enclosure with a thermally-bonded powder coat finish, declutchable manual override, visual mechanical position indication, ISO bolt circle, and flying leads.
Resources
Video
Ideal Applications Include: water and wastewater treatment, landfills, aquariums, chemical processing, swimming pools and water features, power plants, and mining applications.
Actuator:Series 17 | Torque:350 in./lbs. | Voltage:85-265 VAC single phase, 24 VDC |
AMP Draw: | Wiring: | Max Ambient Temperature: |
0.45 | 1.2M flying leads | 150°F |
Limit Switches: | Heater: | Cycle Time per 90 degree: |
2- SPDT end of travel switches 2-SPDT dry contact switches | .5W | 12 seconds |
Features/Benefits
Resources
Online Tools
Features/Benefits
- Size: Compact, lightweight
- Motor: Low current, reversing DC motor
- Multi-voltage: 85-265VAC single-phase, 24VDC
- Overload Protection: Electric motor cuts out at 2 Amps
- Gear Train: Permanently lubricated solid gearing
- Corrosion Resistant Enclosure: Thermally bonded powder coat finish
- Position Indication: Mechanical dial indication
- LEDs: Open and close LED position indication (red/closed, blue/open)
- Declutchable Manual Override:Push down override button and use provided lever to manually position in the event of no power
- Auxiliary Limit Switches: Dry contact switches for open and close positions
- Enclosure: Combination NEMA Type 4X and 6 enclosure with captive cover screws
- Electrical Connections: Sealed cable gland with 1.2M flying leads
- Space Heater: Standard equipment
- ISO Mounting: F03, F04, F05 X 14mm star
Resources
Online Tools