Options – Series 94 Peaktronic Positioner

The DHC-100 positioner is a high performance, high resolution digital positioner. A simple three button control is used to configure ALL parameters that the unit needs for a variety of applications, and eliminates the need for special meters and/or tools for calibration. As long as there is supply power, the unit can easily be field calibrated.

This positioner can be calibrated for various command types (such as 4-20mA, 1-5 VDC, 0-5 VDC, 0-10 VDC, or digital) and also the default operation upon loss of command (such as fail open, fail close, or fail as is). The optional transmitter/auxiliary limit switch module is installed into the positioner card via plug and socket. This allows a user defined feedback signal of current or voltage, and provides 3-SPST relay contacts for open position, closed position and a fault condition.

Ideal Applications Include: Precise throttling

Specifications

Size:

A94, B94

Torque:

150 in/lbs – 300 in/lbs

Voltage:

120 VAC, 1-phase, 50/60Hz

Switches:

Two (2) single pole, double throw (2SPDT) , 15 amp rated

Duty Cycle:

A94 = 100%
B94 = 75%

Conduit Entry:

Two (2) 1/2″ FNPT

Maximum Ambient Temperature:

150 F

Amp Draw:

A94 = 0.5A
B94 = 0.8A

Cycle Time per 90 :

A94, B94 5 seconds*
*Cycle times are approximate