Type-75 butterfly valves are quarter turn plastic valves with equal percentage type flow characteristics. They provide moderate flow control and therefore can be used for both ON/OFF and modulating service. Good tolerance to suspended solids but not recommended for use with slurries or debris. The Type-75 butterfly valve is well suited for a wide variety of fluid flow applications. Can be pneumatically or electrically actuated.
Resources
Data Sheet
Specifications
Ideal Applications Include: Isolation valves, control valves, chemical processing, water treatment, water features, fountains, aquariums, landfills, swimming pools, power plants, mining, transportation
Specifications
Size:
18″ – 24″
Bodies:
PP and PVDF
Seats:
EPDM, FKM, and Nitrile
Seals:
Same as seating material
Models:
Wafer Style, Lug Style
Operators:
Gear
Discs:
PP and PVDF
Stems:
403 and 316 stainless steel, titanium, hastelloy C®‡, etc.
- Standard model (18″ – 24″) has polypropylene body, disc and EPDM seat.
- 403 stainless steel stem has full engagement over the entire length of the disc and is a non-wetted part totally isolated from the media
- Bubble-tight seating
- Only abrasion resistant, solid plastic disc and elastomeric liner are wetted parts
- Rotork gear operator
- Data sheet – Type-75 Butterfly Valves
- Specifications – Type-75 Butterfly Valves
- OM Manual – Type-75 Butterfly Valves
- Drawing (Gear) – Type-75 Butterfly Valves
- Drawing (Top Works) – Type-75 Butterfly Valves
- Drawing (Internal Thread Depth Lug) – Type-75 Butterfly Valves
- Butterfly Valve Quick Reference Guide
- Part number search tool
- Chemical resistance tool
- Locate your nearest distributor